- Strip is not deep enough
- Adjust blade depth screws on cutter head clockwise.
- Increase driver “on” time.
- Strip is too deep
- Adjust blade depth screw on cutter head counter clockwise.
- Decrease driver “on” time.
- Strips are inconsistent
- Check that cable is straight.
- Use lubricant on large cables or semi-rigid cables.
- Check there are no slugs or debris caught in cutter head.
- Cutter head is getting jammed
- Clean out slugs from cutter head.
- Resources
- 824 Product Page
- Download Operating Manual
- Technical Documentation: Coaxial Cable Strippers
Can’t find your answer above?
* Required Fields
