PRODUCTS
Dip Strip - 1 lbs.
Part Number: BR1302 One pound (454g) bag of Dip Strip. Dip Strip is used to chemically remove the insulation from virtually all magnet and enamel wires of all sizes and insulation types, without damage to the wire. When heated in the specially designed DSP Stripping Pot, Dip Strip melts and wires are immersed in the molten Dip Strip […]
Open Product Page →Dip Clean 2 Metal Cleaner - 1 pt
Part Number: BR1440 (1) U.S. pint of Dip Clean 2 Metal Cleaner. For use with DSP and USP Stripping Pots and Dip Strip. After stripping using Dip Strip, the stripped wires are then rinsed in water and Dip Clean 2 Metal Cleaner to remove oxides and stripping residue.Item Details Part Number: BR1440
Open Product Page →Dip Clean 2 Metal Cleaner - 1 gal
Part Number: BR1441 (1) U.S. gallon of Dip Clean 2 Metal Cleaner. For use with DSP and USP Stripping Pots and Dip Strip. After stripping using Dip Strip, the stripped wires are then rinsed in water and Dip Clean 2 Metal Cleaner to remove oxides and stripping residue.Item Details Part Number: BR1441
Open Product Page →Nose Cone
Part Number: CL0018 Replacement Nose Cone for use with all DCF units except DCFV, DCFA, DCFB.Item Details Part Number: CL0018
Open Product Page →Blade Guard
Part Number: CL0024 Replacement Blade Guard for use with all DCF units except DCFV, DCFA, DCFB, DCFR.Item Details Part Number: CL0024
Open Product Page →Blade
Part Number: CL0149 Cutting blade for center cuts for use with MR30A (DE0009) portable air operated cutter. Blade cuts 0.130″ OD copper, 0.110″ OD mild steel and .047″ OD piano wire.Item Details Part Number: CL0149
Open Product Page →Blade
Part Number: CL0158 Cutting blade for end cuts for use with MR30A (DE0009) portable air operated cutter. Blade cuts 0.130″ OD copper, 0.110″ OD mild steel and 0.047″ OD piano wire.Item Details Part Number: CL0158
Open Product Page →Blade
Part Number: CL0159 Carbide tipped cutting blade for diagonal cuts for use with MR30A (DE0009) portable air operated cutter. Blade cuts 0.130″ OD copper, 0.110″ OD mild steel and 0.047″ OD piano wire.Item Details Part Number: CL0159
Open Product Page →MR30A Hand-Held Air-Operated Cutter
Part Number: DE0009 This hand-held air-operated cutter uses 85 PSI and creates 617 lbs. of cutting force. It cuts .130″ OD copper, .110″ OD steel and .047″ OD piano wire with diagonal, clipper or end type cuts depending on die. Diagonal carbide blades are also available. The tool is 7″ long and 2 13/64″ diameter. It weighs 1.2 lbs. […]
Open Product Page →Replacement protective vinyl tips
Part Number: IA0743 Replacement protective vinyl tips for AA0125/AA0126 (ECT1)Item Details Part Number: IA0743
Open Product Page →Foot Switch
Part Number: IH0129 Foot switch for bench modelItem Details Part Number: IH0129
Open Product Page →1/2" Intermittent Element (Pair)
Part Number: IH3511 Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500F (815C). Intermittent elements are for hand use and SHOULD NOT be left on continuously for more than two minutes. Dimension of internal diameter of elements is in the closed position.Item Details Part Number: IH3511
Open Product Page →1" Wire Guards (Pair)
Part Number: IH3551 One pair of 1″ (25.4mm) Bench Glo-Ring wire guardsItem Details Part Number: IH3551
Open Product Page →2" Wire Guards (Pair)
Part Number: IH3552 One pair of 2″ (50.8mm) Bench Glo-Ring wire guardsItem Details Part Number: IH3552
Open Product Page →3" Wire Guards (Pair)
Part Number: IH3553 One pair of 3″ (76.2mm) Bench Glo-Ring wire guardsItem Details Part Number: IH3553
Open Product Page →1" Intermittent Element (Pair)
Part Number: IH4511 Quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at temperatures up to 1500°F (815°C). Intermittent elements are for hand use and SHOULD NOT be left on continuously for more than two minutes. Dimension of internal diameter of elements is in the closed position.Item Details Part Number: IH4511
Open Product Page →
